Electro-mech scoreboard manual

Description: This external receiver is designed for outdoor use on all Electro-Mech scoreboards manufactured since It must receive data from a ScoreLink transmitter for operation. Dimensions (L x W x H): in. x in. x in. Weight: lbs. Power Requirements: VAC, A, 60 Hz (supplied via the scoreboard). between the scoreboard and the control console on Electro-Mech scoreboards. If you have purchased this accessory, disregard the section of this manual titled Data Cable Installation. Refer to the installation manual provided for this product. An embedded ScoreLink receiver. 2. Enter fouls on the scoreboard. Do not enter more than 10 fouls on the scoreboard. Notify referees when Team Fouls reach 7 (bonus, shooting 1-and-1) and 10 (double bonus, shooting 2). 3. 5 Minute halftime (verify with the referee if schedule is running late it will be 3 minutes. www.doorway.rug: electro-mech.

The following steps describe how to mount the scoreboard on the posts: 1. Place the back of the scoreboard cabinet against the posts on the ground. Make sure the mounting points are aligned with the posts. 2. Screw the threaded rods into the tapped holes in the scoreboard. 3. a. To see if the Scorebot is receiving correct scoreboard data, press the up/down arrow buttons until you reach screen 05 in the Scorebot digital display. b. Compare the numbers to displayed here to that which is displayed on the venue scoreboard controller. Any changes entered in the venue scoreboard controller should reflect here. If you do not. Outdoor Soccer/Football Scoreboard The purpose of this manual is to explain how to install and maintain the Electro-Mech Model LX Outdoor Soccer/Football scoreboard as well as the LXETN version of this product, which features Electronic Team Names. Operation of the scoreboard is covered in the manual that ships with the control console.

Owner's Manual. Indoor Hockey Scoreboard. The purpose of this manual is to explain how to install and maintain the Electro-Mech Model LX Indoor Hockey scoreboard as well as the LXETN version of this product, which features Electronic Team Names. Operation of the scoreboard is covered in the manual that ships with the control console. for indoor scoreboards, you can either find the breaker the scoreboard is tied into or unplug the power cord (the power cord normally comes out the top of the scoreboard). Cycle power to the scoreboard by turning off power for at least 30 seconds and then restoring power. II Sequence of the POST Note: some older scoreboards may not have a POST. Outdoor Soccer/Football Scoreboard. The purpose of this manual is to explain how to install and maintain the Electro-Mech Model LX Outdoor Soccer/Football scoreboard as well as the LXETN version of this product, which features Electronic Team Names. Operation of the scoreboard is covered in the manual that ships with the control.