Hot plate operation manual

• Do not place on or near a hot gas or electric burner, or in a heated oven. • Close supervision is necessary when operating the cooktop around or near small children. It is recommended children never use the cooktop. • Do not insert any foreign objects into . 2) Other will know the hot plate is use. Figure 1. Cole Palmer Digital Hot Plate Front Panel. Baking a Wafer. Place the wafer on the hotplate with a tweezers. NOTE: Take care that the wafer does not slide off of the hot plate like an air hockey puck. Normal wafer bake time is 90 sec for PMMA e-beam resist. This manual is designed to assist you in the optimal usage of your Corning® hot plate, stirrer, stirrer/hot plate, or external temperature controller. The manual contains English, German, French, Italian, Spanish, and Polish www.doorway.rug com/lifesciences Product Voltages.

manual for future reference. Product Voltages Hot plates, stirrers, and stirring hot plates are available in different voltages. Before initial use, check that the unit you received is the correct voltage for your location. Safety Precautions Caution - Risk of Danger: Cautions there is material in the instruction manual. OWNERS MANUAL INSTALLATION, OPERATION, MAINTENANCE INSTRUCTIONS ® Sherborn Street Corona, CA () FAX () ELECTRIC HOT PLATES FOR YOUR SAFETY PLEASE RETAIN THIS MANUAL FOR FUTURE REFERENCE IMPORTANT Electrical wiring from the electric meter, main control box or service outlet to appliance must be. Overloading the plate may damage the plastic cover and cooker plate. W hen operating t appliance or fter moving the pot, the cooking area will remain hot for a period of time. Do not touch it. Be careful of scalding caused by the high temperature. Danger of scald ing.

Stirring Hot Plates OPERATION MANUAL AND PARTS LIST SERIES 13Model # Voltage Description SP 7X7 SP 7X7 SP 7X7 SP 10X10 SP 10X10 SP 10X10 LTX1 • 27/04/ manual for future reference. Product Voltages Hot plates, stirrers, and stirring hot plates are available in different voltages. Before initial use, check that the unit you received is the correct voltage for your location. Safety Precautions Caution - Risk of Danger: Cautions there is material in the instruction manual. a) Disconnect hot plate from power supply. b) Turn hot plate upside down and remove bottom cover. c) Remove two nuts that hold heater coil to termi-nals and slide heater coil off. d) Install new heater coil and secure with two nuts. e) Replace bottom cover. f) Turn hot plate upright and reconnect to power supply. To Replace Cycle Light.